Installing your new ARRIS WiFi Modem
In order to install your Arris WiFi Modem, view this short video or follow the step-by-step guide below:
- Switch off and unplug your computer and any other devices to be connected with your modem.
- Connect the Melita cable to the connector labelled CABLE (2) on the back of the modem.
- Connect the telephone wire (if installed) to the connector labelled TEL1 (3) on the back of the modem.
- Connect your computer and any other devices to the modem using an Ethernet cable (4). You can use any of the Ethernet ports on the back of your modem.
- Your new modem has built-in WiFi so you can also connect wireless.
- Connect the power cord to the back of the modem labelled POWER (6), plug into an AC wall socket and switch on. Your modem is ready to use when all LEDs on its front panel stop blinking and remain on.
- Switch on your computer and any other other devices connected to the modem.